Main > Main Forum

Do I have set diagonals in MAME?

Pages: (1/2) > >>

Grimoz:

Ive just wired my control panel up and it is working good, i just want to ask one question. When in MAME do i have to set the diagonal joystick directions because I cant seem to do it. I have Happ Supers in 8 way mode but its really difficult to get the diagonal directions to register when playing games like street fighter 2. Do i maybe need to adjust something on the joysticks so that it registers both ways?


Thenasty:

you probably need to flip the actuator. It's probably set for 4-way.

Grimoz:

Nah its set to 8 way, but i did just notice that the joystick itself is not centred which is quite strange, anyone else have this problem and know how to fix it?

Grimoz:

Think i may have figured it out, when i installed the joystick I accidently put one of the caps on upside down, i'll have to take it apart and turn it around to see if that helps.  :hissy:

RandyT:


--- Quote from: Grimoz on August 03, 2011, 10:49:59 pm ---Think i may have figured it out, when i installed the joystick I accidently put one of the caps on upside down, i'll have to take it apart and turn it around to see if that helps.

--- End quote ---

When you get it back together, try it out.  If you still think it's soft in the diagonals, keep in mind that the blades on the switches can be tweaked a bit to offer the response you are looking for.  You'll probably find that you won't need to if the stick is assembled properly, but it's always an option.

RandyT

Pages: (1/2) > >>

Go to full version