| Main > Main Forum |
| Any interest in original cab dimensions |
| << < (56/69) > >> |
| Jakobud:
--- Quote from: MinerAl on August 17, 2004, 09:41:26 pm ---Ignorant of the Atari Football sub thread here I posted limited dimensions for mine on Paige's Giant Coctail thread. I hope these'll help somebody make plans. I'll do specific measurements and pics if needed. --- End quote --- I just PM'ed you with some more instruction for them so I can draw them up. Well get TnF soon too. And I'll get those Dunk Shot cocktail dimensions from paige too! |
| spriggy:
I just scored the general side dimensions and angles for the T'n'F cocktail. Excellent. I just need to get the dimensions for the control panel (which could be fairly closely worked out from the side dimensions anyway), dimensions for the coin door location, access door and extension base height. I also need the offset dimensions for the access door and opposite side, the glass and the cp itself (ie the access door, cp and glass are not level with the cabinet edges, but offset! Looks about 1/2".) Also, how is the underside of the control panels constructed. The Atari football cocktail has a long piece of particle/mdf board which the monitor mounts on, this also extends to cover the underside of the control panel. Is the Track 'n' Field cocktail built the same?? (see attached Atari Football drawing) I hope you understood all that... I almost don't.. ;D These dimensions would be very easy to obtain. The plans won't take long to knock up either. Any help!! Jakobud, I can compile these and send them to you whilst you compile the Atari Football. Cheers. |
| MinerAl:
The player 1 CP on the Atari Football (the one to the left of the coin door anyway) isn't on the sliding monitor board. Its underside is only big enough to extend to the main body of the cab. The sliding monitor board butts up to it. So you can take the monitor and player 2 CP off together, and still have player 1 CP in place and unaltered. |
| Laurent:
--- Quote from: Jakobud on August 17, 2004, 03:11:58 pm ---No, they are different. Similar, but different, especially around the kickplate/coindoor panel. --- End quote --- Then I'll need those as well... ;oP I might check if I can mesure up something as old as MK4 at my local arcade... |
| Tilzs:
I have an operation wolf and an outrun cab sitting in my basement. Does anyone want measurements? The op wolf is pretty unique and there are a lot of angles / pieces on it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |