Main > Main Forum
I-PAC Wiring Question
(1/1)
juxtapose519:
This is probably a scrubby question, but I know very little about wiring and I've looked everywhere and can't find an answer.

If I were to wire two inputs to the same connector on an I-PAC, would they both function?

For example, if I were to create two sets of controls (one with an 8-way joystick and another with a 4-way joystick), could I wire both joysticks to the same four connectors? Or could I connect both a button and a coin door to the same coin connector? Or add a second button to the 1-player start connector to use as a dedicated shift button?

I'm not necessarily looking to do these things, I'd just like to know if it's possible.
Vigo:
Yes, you can hook up multiple buttons to one connector set. Easy as putting a second set of wires in the connector.

If you wanted to get really crazy, you could also hook up a toggle switch to have only one button register at a time. Not hard to do at all.  :cheers:
juxtapose519:
Sweet, thanks!
DeLuSioNal29:
Also, check out the videos that I made on how to wire up controls.

http://forum.arcadecontrols.com/index.php?topic=80229.0

There are other useful videos on that topic above as well.

Good Luck!

DeLuSioNaL29
Navigation
Message Index

Go to full version