Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Groovymame + arcadevga v2(HD2400) + drivers calamity??  (Read 2694 times)

0 Members and 1 Guest are viewing this topic.

scatoons

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:January 27, 2012, 12:45:54 am
Groovymame + arcadevga v2(HD2400) + drivers calamity??
« on: January 27, 2012, 12:44:43 am »
Hi Calamity,

I post here because I haven't seen my problem elsewhere :
I would have liked to try your drivers on a configuration based on ArcadeVGA2 HD2400 (WinXP32).
After having properly uninstalled the Ultimarc driver, I installed your driver "crt_emudriver_9.3_1.2a_xp32_multisync".
Then, the executing of Arcade_OSD indicate "crt_emudriver not found".
Indeed, by checking the properties of the GPU, I notice the card didn't start because there is a code 10 error.

Are you informed about incompatibility between your drivers and those HD2400 from Ultimarc?
Does there exist a particular procedure with these GPU?

If that can be useful to you, here is a screenshot of this HD2400 device ID:



Thanks in advance for your assistance.

Bye

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7411
  • Last login:March 14, 2024, 05:26:05 am
  • Quote me with care
Re: Groovymame + arcadevga v2(HD2400) + drivers calamity??
« Reply #1 on: January 27, 2012, 05:09:36 am »
Hi scatoons,

Unfortunately, there's no support for ArcadeVGA cards based on HD2400 chipsets or above. Just the old Radeon 9250 and possibly X300 and X600 based cards are supported.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi