Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Scratch Slim Marvel vs Capcom [14 Nov - Finished]  (Read 73282 times)

0 Members and 1 Guest are viewing this topic.

MrChucky

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #200 on: September 20, 2012, 01:14:12 pm »
Hi Martijn,

You have laminated both sides of the side panels, I wanted to do this as well with 0,9 mm HPL you used but the 19mm T-molding doesn't flush entirely ( 18mm MDF + 2 x 0,9 mm = 19,8 mm ) , so 0,4 mm sticks out on both sides. How does this look on your Cab ?

And where did you get the perforated plate for the backside panel ?

I'm making a combination of your curved Streetfighter cab and the slim Marvel vs Capcom, work is still in progress I'll make a new Project Anouncement soon with photo's.



Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #201 on: October 30, 2012, 04:24:31 am »
Sold  :applaud:

edekoning

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 522
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #202 on: October 30, 2012, 05:02:50 am »
So when will you start building a new one :P

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17024
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #203 on: October 30, 2012, 10:19:52 am »
***Build what you dig, bro. Build what you dig.***

steinar-t

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 48
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #204 on: November 16, 2012, 04:32:17 am »
Hello Martijn!

Just found this forum a few day ago and decided to make me a cabinet. I really like everything you did on this project :notworthy:
Woud it be possible to get some measurments of your side panels? I want that shape of it!

Got 2 sheets of mdf today :cheers:

Greetings from norway.
Steinar.

VictorBangle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #205 on: December 07, 2012, 12:04:03 am »
Congrats on a very professional cabinet. Looks simply awesome!

griffindodd

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1433
  • Old Account, now posting as 'Maximus'
    • Arcade Icons
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #206 on: December 07, 2012, 05:02:24 pm »
Just wanted to say thanks for this build thread, it's responsible for all of my inspiration to build my Revolution cab and also for the credit card bill that build generated.  :lol

Well played Sir!!!!

Santoro

  • Purveyor of Shiny Arcade Goodness
  • Santoro
  • Trade Count: (+31)
  • Full Member
  • *
  • Offline Offline
  • Posts: 3033
  • Boycott Quarters!!!
    • ArcadeReplay!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #207 on: January 16, 2013, 09:27:48 am »
Wow, I somehow missed this build until now.  What a fantastic job start to finish!

otsep

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • I'm your huckleberry...
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #208 on: February 09, 2013, 12:04:58 pm »
Hello Martijn!

Just found this forum a few day ago and decided to make me a cabinet. I really like everything you did on this project :notworthy:
Woud it be possible to get some measurments of your side panels? I want that shape of it!

Got 2 sheets of mdf today :cheers:

Greetings from norway.
Steinar.

Second this. Any Guidance would be great.
Vids: Namco Rockin' Bowl-O-Rama, MVS
Pins: Demolition Man, Meteor, PINBOT, 300, Space Mission

Wishlist:
Vids: Upright Racer, Small-ish Shooter(Carnival King?)
Redemption: Skee Ball
EM: Aztec, El Dorado, Jolly Roger, Target Alpha, Time Zone(Space Time)
SS: Eight Ball, Strikes and Spares
DMD: Hook, STTNG, STPRO, TAF, TSPP

Remember Wheaton's Law

jaysaugus

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #209 on: November 11, 2013, 07:38:13 pm »
Hello Martijn!

Just found this forum a few day ago and decided to make me a cabinet. I really like everything you did on this project :notworthy:
Woud it be possible to get some measurments of your side panels? I want that shape of it!

Got 2 sheets of mdf today :cheers:

Greetings from norway.
Steinar.

Second this. Any Guidance would be great.

AGREED!!!  I just signed up for this site just so I could write on this forum in the hopes of getting a blue print or design for this exact cab!

Fursphere

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #210 on: November 18, 2013, 09:51:28 am »
I was personally just wondering how wide it is.  :)

Lewion

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #211 on: December 11, 2013, 03:46:45 pm »
Hello Martijn!

Just found this forum a few day ago and decided to make me a cabinet. I really like everything you did on this project :notworthy:
Woud it be possible to get some measurments of your side panels? I want that shape of it!

Got 2 sheets of mdf today :cheers:

Greetings from norway.
Steinar.

Second this. Any Guidance would be great.

AGREED!!!  I just signed up for this site just so I could write on this forum in the hopes of getting a blue print or design for this exact cab!

Well, I actually just registered for the same reason. I'm starting to build my arcade this weekend and I would be honored to make one with the same dimensions as this one..

Rob Black

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #212 on: December 11, 2013, 08:00:06 pm »
Hello Martijn!

Just found this forum a few day ago and decided to make me a cabinet. I really like everything you did on this project :notworthy:
Woud it be possible to get some measurments of your side panels? I want that shape of it!

Got 2 sheets of mdf today :cheers:

Greetings from norway.
Steinar.

Second this. Any Guidance would be great.

AGREED!!!  I just signed up for this site just so I could write on this forum in the hopes of getting a blue print or design for this exact cab!

Me three!!!!! Awesome cab

d3adv3nom

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #213 on: January 12, 2015, 03:08:04 pm »
Sold  :applaud:

Hi Martijn

can you please send me the measurements you use to build this cabinet.  so far I like your design the most.

thank you

phoenixtom

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Learning....
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #214 on: February 24, 2015, 04:43:45 am »
Great Cabinet!! Very inspiring!

nanoflower

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • All Your Base Are Belong To Us
Re: Scratch Slim Marvel vs Capcom [7 Aug - Plexi Plexi]
« Reply #215 on: May 19, 2015, 03:16:56 pm »
(...)Then started to make the cables for the street fighter fight pad, i extended the switch for analog to digital switch (pad,L-stick,R-stick)(...)

Hi Martijn

I know it's been a while since you build this thing, but I was hoping you'd still be able to answer a few questions about the 3-way position switch on the MadCatz PCB:

Looking at the fitted switch on the PCB it has 6 solder points, yet you only seem to have soldered 4 wires on to yours.


Do you remember:
- if you removed the small pre-fitted switch?
- what solder points you used? (top row, bottom row...?)
- and where you got the replacement switch? (I know it's a long shot ???)

/Nano

« Last Edit: June 04, 2015, 04:25:28 pm by nanoflower »

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #216 on: May 25, 2015, 04:23:36 am »
You can just read out with a multimeter. center is neutral(ground?), one set of pins is not used. and I think connecting left with center or right with center gives away the other 2 modes..

nanoflower

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • All Your Base Are Belong To Us
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #217 on: May 25, 2015, 08:10:26 am »
You can just read out with a multimeter. center is neutral(ground?), one set of pins is not used. and I think connecting left with center or right with center gives away the other 2 modes..

Thank you for your reply Martijn.
I measured the pins as you suggested, and this is the diagram in case any one else is interested.
A 3-position 2P3T ON/ON/ON slide switch is what's needed.



/nano

vaderag

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • Building my own cab :)
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #218 on: November 27, 2015, 10:44:49 am »
Hey mate, love this build!
looks way better quality than what I end up building, but anyway I'm wondering about using a 32" tv in my build but wondering how you feel this works with the position you end up standing - i'm worried it may be too big a screen too close? What do you feel?

Thanks

GamecockMameCab

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #219 on: February 11, 2016, 03:53:11 pm »
Martijn - do you still have the file that is your control panel layout?  I am starting a cab that will be very similar in size and layout, and I love your control panel layout.

nanoflower

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • All Your Base Are Belong To Us
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #220 on: March 18, 2016, 08:16:23 am »
Hi

+1 for the CPO laypot, It'd be very helpful. Also how did you fasten the CPO?

/Nano

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #221 on: June 30, 2016, 03:27:34 pm »
Patent has worn out :)

Template : http://www.mediafire.com/download/fw896m7tsn9axi9/control_panel_template.psd

Sketchup model, well sort of. I used sketchup more to design the sides. The inside panels could have wrong measurements!

http://www.mediafire.com/download/1as33c3oqb4sp6q/cabfinal-angled.skp

http://www.mediafire.com/download/73dcebc7lc6o316/cabfinal-angled.skb




« Last Edit: June 30, 2016, 03:31:45 pm by Martijn »

nanoflower

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • All Your Base Are Belong To Us
Re: Scratch Slim Marvel vs Capcom [5 Okt - Pcb Pets]
« Reply #222 on: April 07, 2017, 02:19:21 pm »
(...)Mounted the JLF plates(...)


I was wondering about this way of mounting the brackets.
Does it not create a gap that is only covered by the cp overlay, that someone could poke a finger through by accident?

/nano (...and yes I've started my build again, how is your new box coming along? ;))



Nigel-James

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 49
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #223 on: April 09, 2017, 07:08:38 pm »
Quote
I was wondering about this way of mounting the brackets.
Does it not create a gap that is only covered by the cp overlay, that someone could poke a finger through by accident?

Use plexiglass over the top of the control panel.

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 802
  • Akira!
    • ModMyBox
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #224 on: April 10, 2017, 02:25:33 pm »
the top is covered with laminate, nd the cp art. Good to see you back

nanoflower

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • All Your Base Are Belong To Us
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #225 on: April 11, 2017, 08:27:13 am »
the top is covered with laminate, nd the cp art. Good to see you back
Note to self...Why the heck would you want to router anything else out other that the actual shaft hole -not sure what i was thinking  :banghead:.

/nano

connorlo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #226 on: June 06, 2017, 12:06:07 am »
Hi Martijn,

fantastic build, your posts have helped me alot when building my own cabs. Wondering on this slim one, how do you get to the insides, it doesn't look like any of your panels have a hinge/lock do you have to undo some screws to get in?

Thanks
Connor

TheRealSkywalker

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #227 on: August 19, 2017, 02:46:10 pm »
Everything looks great! Plan on starting a build just like it any blueprints would be great.

Demon-Seed

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1517
    • DemonCade (WORKING URL!)
Re: Scratch Slim Marvel vs Capcom [14 Nov - Finished]
« Reply #228 on: August 21, 2017, 08:02:59 pm »
Hey
Is there plans/cutouts for this?
Life is like a video game, a good one never dies..

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31