Main > Main Forum

Slim Cab with 4 CP - Top Heavy?

Pages: << < (3/5) > >>

Dr. Willy:

topjimmycooks if you would do a sketchup that would be awsome, im not good with programs like that. IF you want to get crazy, throw a 4 player cp on there to see how it looks, im very interested to see. Im going to try and replicate the evoution from the info i am finding in random threads.

TopJimmyCooks:

what's the out to out measurement on the case of the display?  I can take a look at it tomorrow during lunch.

Dr. Willy:

from what i am finding on the site the diminsions of the monitor are 25.7x20.7 Here is a link to said monitor.

http://www.hannsg.com/US/EN/Products/LCD%20Monitors/Common.aspx?productId=204

Thanks again

TopJimmyCooks:

Ok, here you go, stretched to 27" inside the sides to fit your display.  The CP is 40" wide, check with the guys with 4P to see if this is wide enough.  Cab overall is 28 1/2" by 20" at the base. 



Disclaimer, this cab was nicely sketched by Evilnuff and I very quickly went in , exploded everything and pulled it in to shape.  So it's no longer suitable for looking at individual construction components, cutlisting, etc.  Any sketchup lameness is mine alone.  If you like this and proceed I will make sure you can get a cleaner version done.

I think it looks good.  That display is huge- obviously it will have some bezel.  In the sketch the out to out of the display is shown by translucent gray. 

Looks like the .skp file won't send, it's not one of the allowed file types to attach.  PM me and I'll email it to you.

Donkbaca:

I would make the marquee area taller, otherwise you are looking at a lot of top/bottom bezel

Pages: << < (3/5) > >>

Go to full version