Main > Main Forum

Standoffs for acrylic?

Pages: << < (2/3) > >>

Vigo:

Big Box-O-Machine screws = My best friend with these kind of projects.  ;D

Franco B:

Depends if you want the bolt heads showing on the other side or not....

I often use acrylic with counterbored holes to make mounts:







robertsig:

I found a way that I think will work.  It's just a mini-itx board, so it should be secure enough.

I'll glue some of these flat plastic standoffs.
http://www.bizsyscon.com/product/OTHER__BSC-STANDOFF__5144.html

bkenobi:

I've found that clips like those are a pain in the arse.  The ones I've used would bend rather then pushing through the hole.  I would personally use a screwed in solution, but I don't see why those standoffs wouldn't work.

eds1275:

I generally get a little piece of pex pipe from the plumbing area of home depot. Just a toilet supply tube or something for a dollar, gives me about 50 standoffs.

Pages: << < (2/3) > >>

Go to full version