| Main > Main Forum |
| Standoffs for acrylic? |
| << < (2/3) > >> |
| Vigo:
Big Box-O-Machine screws = My best friend with these kind of projects. ;D |
| Franco B:
Depends if you want the bolt heads showing on the other side or not.... I often use acrylic with counterbored holes to make mounts: |
| robertsig:
I found a way that I think will work. It's just a mini-itx board, so it should be secure enough. I'll glue some of these flat plastic standoffs. http://www.bizsyscon.com/product/OTHER__BSC-STANDOFF__5144.html |
| bkenobi:
I've found that clips like those are a pain in the arse. The ones I've used would bend rather then pushing through the hole. I would personally use a screwed in solution, but I don't see why those standoffs wouldn't work. |
| eds1275:
I generally get a little piece of pex pipe from the plumbing area of home depot. Just a toilet supply tube or something for a dollar, gives me about 50 standoffs. |
| Navigation |
| Message Index |
| Next page |
| Previous page |