Main > Main Forum
Killer Instinct 2 monitor help
(1/3) > >>
postmortem:
Just got a KI2 machine and the monitor doesnt display blue. I plugged another game into it and it doesnt display blue either. I can turn the blue bias on the neck board up and the screen turns blue so I figure the problem is either the blue wire in the jamma harness or something is wrong with the chassis. There is some white stuff at the base of all the caps on the chassis and I dont know what it is. Could it be something leaking? would a cap kit fix this?

kalars123:
is it powdery? those caps are probably poped, i used to go through this alot back in the day OCin pre-500mhz computer's heh
postmortem:
its solid. almost like dryed paint
kalars123:
mmm not sure what to tell you then, if it was the cap's leaking it would be solid, but abit powdery you could easily scrape it away, but if it's SOLID I've no idea, no harm in a cap kit though, if it's not displaying blue then as the old saying go's you can't brake what's broke.
Malenko:
if thats like the stuff on my monitor its just to hold the cap in place. I'd check the blue from the jamma wire to the input on the chassis.The plug should be ont he right hand side of the chassis if youre facing the back, and its a dedicated KI2
Navigation
Message Index
Next page

Go to full version