| Main > Main Forum |
| Best way to convert a HotRod SE to USB? |
| << < (2/2) |
| Donkbaca:
Its a serial connection. It plugs into a USB cable that is included. THe other PS2 is for connecting a keyboard to program the different modes. you can just ignore it... |
| BobA:
Stripped off the connectors on the Hotrod wires and connected directly to the controller terminal board. You just have to refer to the attached documentation and connect your buttons accordingly. |
| Guywiththegun:
--- Quote from: Donkbaca ---Its a serial connection. It plugs into a USB cable that is included. THe other PS2 is for connecting a keyboard to program the different modes. you can just ignore it... --- End quote --- Thanks, looks great then. --- Quote from: BobA ---Stripped off the connectors on the Hotrod wires and connected directly to the controller terminal board. You just have to refer to the attached documentation and connect your buttons accordingly. --- End quote --- Maybe a dumber question than the VGA thing, but what would I need to strip the connectors off? |
| BobA:
Just cut the wires at the connector with a side cutter and strip the wire to use it with the screw connector on the ipac. |
| mark shaker:
http://www.xgaming.com/store/arcade-parts-and-accessories/product/hanaho-hotrod-joystick-upgrade-kit/ - Mark |
| Navigation |
| Message Index |
| Previous page |