| Main > Main Forum |
| New Member with a Taito cab |
| (1/1) |
| theredlineboss:
Not sure if this is the right place for a basic intro, so my apologies if I should have posted elsewhere. At any rate, I've been lurking for a couple of months & joined after I picked up my first arcade cabinet. I ran into an ad on my local Craigslist for some relatively cheap cabinets (price range of $75-125). Here's a pic from the ad: From this blurry pic, I decided the one on the left would likely follow me home. And after handing over $75, it did. ;D It's nothing particularly special, but the cabinet (aside from the base) is pretty solid & mostly complete. My immediate plan is to fix the monitor (picked up a rebuild kit) and to repaint the cab (with Taito stencils) this summer. I'll likely install a multicade board, assuming I don't take a shine to Bloody Wolf. -Rob |
| Donkbaca:
I love the Taito cabs with the Taito stencil! Good luck! |
| ark_ader:
Let us know how you get on! :cheers: |
| mgb:
Very nice. keep us posted on how it goes |
| armi0024:
Those are my favorite cabs, ever since my first cabinet which was a Stratavox. The coin doors are PITA to find parts for, especially the lower on. I had a new coinbox door fabricated for that cabinet. But enjoy they are a lot of fun! |
| Navigation |
| Message Index |