Main > Main Forum
Solved:Need wiring help with TB3
(1/1)
UncleMame:
Does anyone have a link or document to install the TB3 Groovy Gamegear Trackball (wiring/installation) ?

Thanks
BobA:
Did you get the opti wiz with it for an interface? 
RandyT:

The Groovy-TB 3" Trackball has three wire pairs, each with .100" spaced connectors.  They are as follows.

Red and Black - +5vDC and GROUND respectively.
Blue and Purple - Y-Axis
Yellow and Green - X Axis

The orientation of the axis connection will vary, based on the encoder wheels ordered.  If either axis is reversed, just unplug that wire pair from the Opti-Wiz, turn it 180 degrees, and re-connect.
Navigation
Message Index

Go to full version