Main > Project Announcements
Oak polystained Walnut Cocktail Build to feature in Living room. Lotsa photos!
extendedplayarcade:
I got to work a little bit more on the monitor hinge system. It is almost done. All I have to do is add the clamp to the opposite side of the hinge. Drill the holes (line them up as well) and mount the monitor to the aluminum angle iron.
I think it is going to work out pretty good. Or at least I hope it does.
I can't work on it tonight. It is league bowling nite tonight :cheers:
extendedplayarcade:
The monitor worked out pretty well. I am pretty happen with how it looks. Plus with this method now it gives me access to use the buttons on the front panel.
Next I am going to de-case the computer and install it in the cocktail cabinet.
Trap:
--- Quote from: extendedplayarcade on July 14, 2011, 04:42:45 pm ---
Ok got frustrated a little over a month ago and it halted my project.
It is also to nice out lately and been doing other stuff around the house and heading to the beach to ride a few waves.
Anyways anyone have any suggestions? I guess the wood I used is about 1/4 to thin.
Should I make some spacers?
Thanks in advance for any good suggestions
:cheers:
--- End quote ---
There are 1" clips out there.
http://www.twistedquarter.com/index.php?main_page=product_info&cPath=219_228&products_id=1199
http://cgi.ebay.com/NEW-Ms-Pac-Pac-Man-Galaga-Cocktail-Table-Glass-Clips-1-/320702527335?pt=LH_DefaultDomain_0&hash=item4aab5c3767
Your table is looking great! Keep at it!
extendedplayarcade:
:banghead: :banghead: :banghead: :banghead:
Oh man i can't believe they has smaller ones. I guess I will be ordering tomorrow.
I didn't even think about this when I bought it. Hopefully my mistake will help someone in the future.
If it does. It will make my error worth while.
Thanks for the help and sending me the link. :cheers:
--- Quote from: Trap on August 09, 2011, 04:44:10 pm ---
--- Quote from: extendedplayarcade on July 14, 2011, 04:42:45 pm ---
Ok got frustrated a little over a month ago and it halted my project.
It is also to nice out lately and been doing other stuff around the house and heading to the beach to ride a few waves.
Anyways anyone have any suggestions? I guess the wood I used is about 1/4 to thin.
Should I make some spacers?
Thanks in advance for any good suggestions
:cheers:
--- End quote ---
There are 1" clips out there.
http://www.twistedquarter.com/index.php?main_page=product_info&cPath=219_228&products_id=1199
http://cgi.ebay.com/NEW-Ms-Pac-Pac-Man-Galaga-Cocktail-Table-Glass-Clips-1-/320702527335?pt=LH_DefaultDomain_0&hash=item4aab5c3767
Your table is looking great! Keep at it!
--- End quote ---
extendedplayarcade:
Well I ordered the 1 inch clips. (anyone need 1 1/4 inch clips?) I wasn't even thinking when i ordered :banghead:
anyways does anyone know where i can get a metal piano hinge for my cocktail table? No shorter than 12" no longer than 18"
I did a few searches but can't find one I want. A heavy duty one would be nice with no sharp edges.
I have one but i is super flimsy and bent in a few spots. I even cut the edges so the kids won't cut themselves or anything.
Maybe I will post this on the main page so people will see it
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version