Main > Project Announcements
Xbox 360/DC/VGA Jamma interface
Franco B:
I finished making this recently and I thought I would post a couple of pics.
Its basically a project box with two PS360s and a Ultracade Video Convertor (UVC) in. Eventually it will also house two of Akishops Dreams PCBs (if, and) when they are released.
One end has two USB pass thoughs to connect the interface to the 360 with USB A>B cables, it has two DC cable ends mounted in it which will then connect to the DC with DC extension cables and It also has a VGA port to connect the 360 or DC to it.
The other end has the Jamma edge protruding and it also has a 10 pin header which acts as a kick harness connector and it also provides a 12v source.
Once I have the Dreams PCBs I am going to mount them so that the VMUs can be slotted in this end, either side of the header.
Picture 'under the hood':
The cable to the right has a 8 pin AMP UP connector which connects it to the kick harness of my Sega New Astro City. The two pin connector is wired for 12v which them plugs into a female connector in the NAC which then powers the relays mounted in the chassis and sets it to 24kHz.
I also need to make another cable to attach the kick header to the kick header of the Namco Jamma>JVS adapter in my Naomi.
Pic in my NAC:
That's about it really. HUGE thanks to emphatic for doing the graphics for me :cheers:
emphatic:
I HUGELY appreciate this thread. :cheers:
Uchiha Madara:
:applaud: :cheers: :notworthy:
Unreal work you have there... so pro! Um... you planning on making those available upon completion, or is this a personal project?
Franco B:
--- Quote from: emphatic on May 16, 2011, 12:14:09 pm ---I HUGELY appreciate this thread. :cheers:
--- End quote ---
I thought you might ;D
--- Quote from: Uchiha Madara on May 16, 2011, 12:20:38 pm --- :applaud: :cheers: :notworthy:
Unreal work you have there... so pro! Um... you planning on making those available upon completion, or is this a personal project?
--- End quote ---
Thanks :)
I don't have any plans to make any more, as with most things it took about 10x longer than expected :dizzy:
I can give links to any parts I used if it helps though. Let me know and I will post them.
NIVO:
nice work Franco :applaud: