Main > Main Forum

Coin Buttons / Coin Door

Pages: (1/3) > >>

scream1973:

How can i wire this so that both will work at the same time..

As soon as i hook up the coin door switches the button stops functioning..


Ie button 1 and coin slot one both wired to ipac player 1 .. only the slot works


Thenasty:

no need to make it work at the SAME TIME, just one at a time will do...

You need to make sure its wired in parallel and making sure it's connected to NO and GND on the switches.

scream1973:

I have the GNDS on the buttons and coin door switches all connected to common gnd on the ipac.
NO coin switch 1 / button 1 to player 1 coin on ipac
NO coin switch 2 / button 2 to player 2 coin on ipac.

When wired like this only the coin door switches are functional the buttons are not



Thenasty:

here is drawing




scream1973:

For all intensive purposes this is what i currently have configured..
Switch1/2 are wired to the ipac at the same time and come out in parrallel.  and the gnds are daisy chained to the common daisy chain..
 i am going to strip the wires back a bit more and see what happens with it if i try it exactly as you have drawn


Pages: (1/3) > >>

Go to full version