| Main > Main Forum |
| Coin Buttons / Coin Door |
| (1/3) > >> |
| scream1973:
How can i wire this so that both will work at the same time.. As soon as i hook up the coin door switches the button stops functioning.. Ie button 1 and coin slot one both wired to ipac player 1 .. only the slot works |
| Thenasty:
no need to make it work at the SAME TIME, just one at a time will do... You need to make sure its wired in parallel and making sure it's connected to NO and GND on the switches. |
| scream1973:
I have the GNDS on the buttons and coin door switches all connected to common gnd on the ipac. NO coin switch 1 / button 1 to player 1 coin on ipac NO coin switch 2 / button 2 to player 2 coin on ipac. When wired like this only the coin door switches are functional the buttons are not |
| Thenasty:
here is drawing |
| scream1973:
For all intensive purposes this is what i currently have configured.. Switch1/2 are wired to the ipac at the same time and come out in parrallel. and the gnds are daisy chained to the common daisy chain.. i am going to strip the wires back a bit more and see what happens with it if i try it exactly as you have drawn |
| Navigation |
| Message Index |
| Next page |