| Main > Main Forum |
| ipac - laggy pushbuttons |
| << < (2/3) > >> |
| yotsuya:
Check your ground, as well. I've had one or two issues in the past that were all ultimately related to a loose or incorrectly connected ground connection. |
| sapro:
--- Quote from: yotsuya on May 11, 2011, 11:34:29 am ---Check your ground, as well. I've had one or two issues in the past that were all ultimately related to a loose or incorrectly connected ground connection. --- End quote --- My grounds are done via daisy chain. It seems (to me at least) that if the other buttons in the chain fire as they should the ground should be ok throughout? |
| TopJimmyCooks:
Thats right, usually if you lift a ground a lot of stuff will not work. A single button problem almost can't be a ground unless its the last one on the serial chain. |
| scofthe7seas:
It's definitely the shift key issue. I did a bunch of work on my CP a little while ago and when testing all the buttons to make sure I didn't screw something up, I found the 1p button being laggy also. I did a search and eventually found out this same information. (though the search was not as easy/apparent as you might think..) I disagree that the shift / admin buttons is unnecessary though. I have tab / ` (for volume) / unthrottle (for FF during long load times, probably not the correct term) and f3 for reset. All pretty handy to have without having to tip back my barstool and roll out the keyboard drawer :P |
| scofthe7seas:
I didn't know that about MAME having that ability, but I don't know if that kind of setup is very different from the switch/admin function on the ipac. Maybe you just mean admin buttons on the CP? There isn't really any call for pressing the player 1 button quickly, so comboing it with some joystick/button presses isn't any different than mame having that function built in. Or is it? If so, maybe I'm just missing something. :dizzy: |
| Navigation |
| Message Index |
| Next page |
| Previous page |