Main > Main Forum
Looking for stainable veneer - super thin!
(1/3) > >>
javeryh:
Anyone know where I can get some wicked thin stainable veneer?  I need to match the grain of cabinet grade birch plywood.  I need a fairly large piece - big enough to cover the side off a cocktail cabinet.  Any leads would be appreciated!

 :cheers:
leapinlew:

--- Quote from: javeryh on May 10, 2011, 08:36:19 pm ---Anyone know where I can get some wicked thin stainable veneer?  I need to match the grain of cabinet grade birch plywood.  I need a fairly large piece - big enough to cover the side off a cocktail cabinet.  Any leads would be appreciated!

 :cheers:

--- End quote ---

Finally getting around to covering up that 3rd panel?
scream1973:
You can pick up veneer at most big box stores or lumber yards. I know home depot carries it in widths up to 24 inches.
javeryh:

--- Quote from: leapinlew on May 10, 2011, 09:31:54 pm ---
--- Quote from: javeryh on May 10, 2011, 08:36:19 pm ---Anyone know where I can get some wicked thin stainable veneer?  I need to match the grain of cabinet grade birch plywood.  I need a fairly large piece - big enough to cover the side off a cocktail cabinet.  Any leads would be appreciated!

 :cheers:

--- End quote ---

Finally getting around to covering up that 3rd panel?

--- End quote ---

Yup.  I need to:

- cut out the CP and remove the coin door on that one side. 
- cut out pieces of plywood to fill in the holes.
- bondo and sand
- add the veneer
- cut a new hole for the coin door (it needs to be higher now). 
- stain and poly

That's doable in a weekend I think except for the stain and poly which will likely be spread out over a few nights to allow for drying.


--- Quote from: scream1973 on May 11, 2011, 09:26:35 am ---You can pick up veneer at most big box stores or lumber yards. I know home depot carries it in widths up to 24 inches.


--- End quote ---

Really?  I haven't noticed... I'll have to check the Home Depot and see what they've got. 
leapinlew:

--- Quote from: javeryh on May 11, 2011, 02:34:20 pm ---
--- Quote from: leapinlew on May 10, 2011, 09:31:54 pm ---
--- Quote from: javeryh on May 10, 2011, 08:36:19 pm ---Anyone know where I can get some wicked thin stainable veneer?  I need to match the grain of cabinet grade birch plywood.  I need a fairly large piece - big enough to cover the side off a cocktail cabinet.  Any leads would be appreciated!

 :cheers:

--- End quote ---

Finally getting around to covering up that 3rd panel?

--- End quote ---

Yup.  I need to:

- cut out the CP and remove the coin door on that one side. 
- cut out pieces of plywood to fill in the holes.
- bondo and sand
- add the veneer
- cut a new hole for the coin door (it needs to be higher now). 
- stain and poly

That's doable in a weekend I think except for the stain and poly which will likely be spread out over a few nights to allow for drying.


--- Quote from: scream1973 on May 11, 2011, 09:26:35 am ---You can pick up veneer at most big box stores or lumber yards. I know home depot carries it in widths up to 24 inches.


--- End quote ---

Really?  I haven't noticed... I'll have to check the Home Depot and see what they've got. 

--- End quote ---

Good luck... I think a decent option might be laminating over whats already there. It still might only take a weekend... but it'll be a full weekend.
Navigation
Message Index
Next page

Go to full version