Main > Main Forum

wiring jamma speakers....

Pages: << < (2/2)

lilshawn:

i'll dig up a GT board at the shop tomorrow and check for you.

pharoah007:


--- Quote from: lilshawn on May 04, 2011, 11:53:00 pm ---i'll dig up a GT board at the shop tomorrow and check for you.

--- End quote ---

This may help.....


looks like I have the speakers hooked up in Series.

I have unhooked 1 for now to be sure. I sure would like to use both of them.

Here is a pic from the Golden Tee manual, It showed the speakers in Series.....but it does not show the wires coming from the JAMMA harness...weird.

I labeled the pic...

1 = the speakers

2 = some 3 prong connectors I can not identify.

3 = terminals labled as U43 pin5 and u43 pin 7

http://i4.photobucket.com/albums/y145/p ... kers-1.png


I find it strange that the JAMMA connector is not in this diagram.

My setup....wires form JAMMA connector go straight to the speakers.


lilshawn:

your photo isn't working.

but i had to repair a GT complete machine today and the speakers are indeed just in parallel on the single channel  :dunno

so just attach your + of one speaker onto the + of the other speaker. same with the -'s



pharoah007:


--- Quote from: lilshawn on May 05, 2011, 10:34:21 pm ---your photo isn't working.

but i had to repair a GT complete machine today and the speakers are indeed just in parallel on the single channel  :dunno

so just attach your + of one speaker onto the + of the other speaker. same with the -'s



--- End quote ---

Right on, thanks man.

That is indeed how I have my speakers wired.

Thanks again for the help.

Pages: << < (2/2)

Go to full version