| Main > Main Forum |
| Wood screws in MDF...are pilot holes needed? |
| << < (4/6) > >> |
| bkenobi:
For the amount of time you will spend trying to get something to work, you could just spend the $20 and get a really cheap and basic right angle drill adapter. The one Blanka posted is similar to the cheap ones. Check Harbor Freight to see some options: Adapter for $19.99 regular price: http://www.harborfreight.com/3-8-eighth-inch-angle-drill-attachment-with-keyless-chuck-92188.html Whole freaking right angle drill with battery and charger for $19.99 sale price: http://www.harborfreight.com/18-volt-3-8-eighth-inch-cordless-right-angle-drill-67043.html If it were me, I'd get the drill and be done with it since that "man drill" is going to take a lot of time and driving to locate. I'm cheap, so I recognize your reluctance to buy another tool after spending a small fortune already. BUT, if you screw up that perfect finish, you'll be kicking yourself later! :cheers: EDIT: it appears the battery may not be included with that drill. If not, just get the adapter IMO. |
| DataWest:
Just do glue it. ;D |
| Necro:
Even with the angle adapter, will you be able to get enough pressure onto the screw in that space to actually push it in? |
| Billkwando:
--- Quote from: Necro on May 04, 2011, 02:26:19 pm ---Even with the angle adapter, will you be able to get enough pressure onto the screw in that space to actually push it in? --- End quote --- I can't believe Dynamo were so lazy that they didn't make pilot holes. I guess I'm lucky that they routed a 2nd set of speaker slots at all......otherwise, I'd be making a "drill grill". |
| RandyT:
--- Quote from: bkenobi on May 03, 2011, 06:46:09 pm ---Adapter for $19.99 regular price: http://www.harborfreight.com/3-8-eighth-inch-angle-drill-attachment-with-keyless-chuck-92188.html --- End quote --- I have exactly this tool, and it works well. It's saved my keister more than a few times on different projects. Just get one, and you can bask in the warmth of knowing that a situation like this won't be a problem again in the future. :) |
| Navigation |
| Message Index |
| Next page |
| Previous page |