Main > Main Forum

Looking for slim cabinet dimensions

Pages: << < (2/4) > >>

emb:

That did cross my mind for a second spacejack. I then realized that the cab might be moved around several times since I have a "little one" on the way.

I was surprised that I forgot about the woody cab. Thanks EvilNuff. Unfortunately I didn't see any dimensions on the base of the cab.

I was doing some more searching and this one caught my attention.

http://forum.arcadecontrols.com/index.php?topic=110471

Its based off of the woody cabinet.

I think my design will also be similar to the woody design.

Generic Eric:

This is kinda slim.  Knievel's Evolution: http://forum.arcadecontrols.com/index.php?topic=70519.msg723545

Donkbaca:

You don't have to worry about it toppling over. 3/4 inch mdf or ply is pretty heavy, and the LCD will probably weigh 20 lbs, max. Mine is 16 inches by 24 inches at the base and is plenty stable

emb:

Thats another nice cab by knievel. Does anyone know the dimensions of the base? I think if I have the base dimensions, I'll be able to go from there.

emb:


--- Quote from: Donkbaca on April 22, 2011, 10:40:07 pm ---You don't have to worry about it toppling over. 3/4 inch mdf or ply is pretty heavy, and the LCD will probably weigh 20 lbs, max. Mine is 16 inches by 24 inches at the base and is plenty stable

--- End quote ---

Nice! Thanks for your dimensions!

Pages: << < (2/4) > >>

Go to full version