| Main > Main Forum |
| Looking for slim cabinet dimensions |
| << < (2/4) > >> |
| emb:
That did cross my mind for a second spacejack. I then realized that the cab might be moved around several times since I have a "little one" on the way. I was surprised that I forgot about the woody cab. Thanks EvilNuff. Unfortunately I didn't see any dimensions on the base of the cab. I was doing some more searching and this one caught my attention. http://forum.arcadecontrols.com/index.php?topic=110471 Its based off of the woody cabinet. I think my design will also be similar to the woody design. |
| Generic Eric:
This is kinda slim. Knievel's Evolution: http://forum.arcadecontrols.com/index.php?topic=70519.msg723545 |
| Donkbaca:
You don't have to worry about it toppling over. 3/4 inch mdf or ply is pretty heavy, and the LCD will probably weigh 20 lbs, max. Mine is 16 inches by 24 inches at the base and is plenty stable |
| emb:
Thats another nice cab by knievel. Does anyone know the dimensions of the base? I think if I have the base dimensions, I'll be able to go from there. |
| emb:
--- Quote from: Donkbaca on April 22, 2011, 10:40:07 pm ---You don't have to worry about it toppling over. 3/4 inch mdf or ply is pretty heavy, and the LCD will probably weigh 20 lbs, max. Mine is 16 inches by 24 inches at the base and is plenty stable --- End quote --- Nice! Thanks for your dimensions! |
| Navigation |
| Message Index |
| Next page |
| Previous page |