| Main > Main Forum |
| jamma+ kick harness TMNT kanomi players3/4 |
| << < (3/6) > >> |
| MonMotha:
I told you. Don't even think about trying to buy the actual connector unless you're in Japan (in which case RS-Online stocks it). Last I checked, JST was out of them, so nobody in the USA could even get them at all. The Molex KK series fits *JUST FINE*, is cheap as all get out, and very readily available. Molex P/N 10-11-2153 is the 15 position housing (about a dollar each in qty. 1), and 08-55-0102 is a nice gold-plated contact (about 30 cents each in qty 10+). |
| runawayabc123:
--- Quote from: MonMotha on April 21, 2011, 04:51:27 pm ---The Molex KK series fits *JUST FINE*, is cheap as all get out, and very readily available. Molex P/N 10-11-2153 is the 15 position housing (about a dollar each in qty. 1), and 08-55-0102 is a nice gold-plated contact (about 30 cents each in qty 10+). --- End quote --- I can't find a source for Molex KK 3pin connectors that admit to being 2.54mm (found many smaller and larger) yet... still searching. Feel free to share one. I have found some 2 pin ones. As for the 15pin housing, can you please explain to me how the one from jammaboards.com with a 2.54mm pitch doesn't work and this one will? Now, I am NOT saying they can't be encouraged on and work ok (I'll point back to the original post about that). What I have found is this: http://www.giz10p.co.uk/index.php?_a=viewProd&productId=248 16pin jst-nh connector (still need contacts, but I can find those). I think these look promising. Still a min order of 10pounds, but better than $200 and waiting. |
| runawayabc123:
Found another site in country that has them instock! Min order is also qty200. Hollow victory. |
| MonMotha:
The 2.54mm (0.1") Molex KK series should be available and stocked at any major components distributor. It's an insanely common connector. I'm not sure where you got that I was saying only ones from certain distributors would work. Why do you need a 3 pin connector? I thought you had said these were 15 pin. Anyway, the 3 pin housing would be Molex P/N 10-11-2033. If you wish to buy the exact connector, feel free. I'd love to do so, but I'm not willing to shell out for such a high minimum order if I only need a couple when something that will work just fine is readily available. I'm a fan of keeping things "ideal" where feasible, but it just seems so unnecessary in this case. You can buy whatever you want. I'm just trying to give you a VERY readily available alternative that will work quite well. |
| runawayabc123:
I don't know why I thought you suggested a 3pin connector. I just did. :dizzy: Back to more Interntz searching. |
| Navigation |
| Message Index |
| Next page |
| Previous page |