Main > Main Forum
Quick button layout question
<< < (3/3)
BELLcadia:
Not a fan of the seven button lay out either.  But dang Nephasth those buttons you made look good.  I am about to buy light up buttons from ultramarc.  Will the Ultramarc buttons work that way 2? 
Nephasth:

--- Quote from: BELLcadia on April 17, 2011, 10:31:13 am ---Not a fan of the seven button lay out either.  But dang Nephasth those buttons you made look good.  I am about to buy light up buttons from ultramarc.  Will the Ultramarc buttons work that way 2? 

--- End quote ---

Not sure what you're asking. If you're asking if you can light them different colors for different games, yes. You would need Ultimarc's RGB bayonet LEDs and their white Ultralux buttons (and use an LED controller like the PACLED64 for example along with software such as LED Blinky). If you're asking if you can light them up for the "ring of light" effect, I'm not sure. To do that you have to order twice as many buttons as you need. Half the order in clear/translucent (for the outer part of the buttons) and the other half in solid (for the plunger). And it doesn't look like Ultimarc sells Ultralux buttons in solid colors, so unless the plungers of a different type of button can fit in an Ultralux body, I would have to say no.
Turnarcades:
I've used the ultralux buttons and can't say for sure if other plungers wouldn't fit, but I can say their design is very different to other buttons, with a wider gap inside for the LED fitment and wider spring coil diameter, so I doubt you could do this.
Navigation
Message Index
Previous page

Go to full version