| Main > Main Forum |
| Trackballs Smaller than 2 1/4"? |
| << < (4/5) > >> |
| clutch:
What do you need to know about the PA TB? I bought one not too long ago. |
| Necro:
Dimensions. That's it. :) (Also, unrelated, if you know if the IL-lumination LED's come prewired or not - the single color ones - that would be nice to know as well :) ) |
| clutch:
The plastic case is 4 1/8" wide, 3 7/8" long (from the top to the bottom), and 1 5/8" tall. Two main wires come out of it. One goes to the pc's mouse port. The other wire branches off into 6 spade type connectors for the 3 buttons. There are 4 LED's under the ball and will light up as soon as you plug this thing in. I don't understand what he means by the ball sitting on wheels. This one sits on three posts that spin. |
| Necro:
AND WE HAVE A WINNER! That should actually fit - Given the measurements are right and I can flip axis on this as it will need to go in sideways with the 3 7/8" side perpendicular to the screen). Looks like I'm going to have to design a third CP. And figure out how to swap the axis and kill the LED - I don't think the colors will work for me and I'd rather just have it glow red or purple or yellow all the time. This things never getting done... :) (I can order all 3 CP overlays at once due to the small depth) Clutch - is the size of the hole in your CP 2 1/4"? Just want to start on the designs. |
| clutch:
Yes it is. |
| Navigation |
| Message Index |
| Next page |
| Previous page |