Main > Main Forum
An appeal to Andy at Ultimarc
<< < (4/4)
Dervacumen:

--- Quote from: Kevin Mullins on March 06, 2011, 05:46:15 pm ---I'd roll'em with a pair of needlenose pliers, add a wisp of solder and call it good ....  ;D

--- End quote ---
I've found this to be the quickest and most cost effective method but I skip the solder part depending on the application.  For example I'm building a one time use cable and need to crimp 3 wires.  I don't go through the 5 minutes of warm up and set up for my soldering equipment.  For longer term applications I solder as well.  I crimp something this size maybe 20 times a year.  Using needle nose pliers instead of the D style crimper is just a little easier.  Same concept though.
Navigation
Message Index
Previous page

Go to full version