Main > Main Forum
ultrastick not working!
(1/4) > >>
danivempire:
Hello

so I installed my ultrasticks, it was working. I tested the first one, no problem... then I installed the second one, close the cab and now nothing works

when I have one plugged in it's detected by ultramap but nothing works, and when the second one is plugged in (with the other one still in it) I got an error message and the program crashes...

I disconnected the harness so just the ultrastick is plugged but it doesnt' work!!!

can you help me???
Nephasth:
Did you address both sticks properly?
danivempire:
I don't know, how do I do that??? (sorry it's my first cab)

Here I plugged the right joystick, it works perfectly, also the buttons.

but when I plug the left stick I got

"runtime error 457
this key is already associated with an element of this collection"

Nephasth:
You MUST do this first when using more than one U360.

From Ultimarc:

--- Quote ---Using more than one UltraStik 360.

Up to 4 UltraStik 360s can be used on one PC. If you are using more than one UltraStik via USB, you MUST do the following before connecting player 2,3 or 4 joysticks.
Assigning an ID:
When the joysticks are supplied, all are set to an ID of ONE. You must change as required so IDs in use are unique. This is how to do it:
Plug ONE UltraStik 360 into the PC via USB.
Start the UltraMap software.
Click on "Assign ID" Select the required ID, 2, 3 or 4.
Unplug and reconnect the USB cable.
Repeat with each joystick as required.
After each one has been assigned with a unique ID, all can be connected to USB.

--- End quote ---
VanillaGorilla:
Yup, ya gotta do that ^^^^^^^
Navigation
Message Index
Next page

Go to full version