| Main > Main Forum |
| Button conf. HELP PLZ |
| (1/1) |
| ZERO:
Hi need some help im alittle lost. I'm useing an I-PAC 4 (56 Inputs) the standard Ultimate 4-player control panel with pinball holes. my questions are: 5 pinball holes and 2 exit buttons , 3 buttons not sure where to put them. and only 4 inputs left. one on each play. 1) there a 5th joystick not sure where that goes. ( just a side note whats that joystick for?) 2) I have 5 pinball holes 4 for flippers and one for the ball where should i wire them into? 3) 3 buttons im not sure where to wire up? 4) and 2 exit buttons so tell if im wrong the 5th joystick gets wired into player one also. im guessing pinballs to player 1 buttons 1 - 5 and 2 exit buttons can get wired together on the same input and that would leave me 3 inputs for the 3 buttons. |
| TOK:
5th stick is probably a dedicated 4 way, and yes it'd be wired into player 1 spot. Unless you're playing other emulators, I don't think there are any 4 player games that use more than 4 buttons. |
| EVEGames:
Zero, it looks to me like those 3 buttons to the right of the 4-way are meant to be used with the 4-way, you could double those up with Player 1 Switch 1, 2 and 3. Otherwise, picture playing Donkey Kong... you're going to want to use that 4-way stick, but you're going to have to reach down to Player 1 Switch for Jump... it's going to feel weird, not to mention it forces you to play left-handed (or right-handed depending on how you look at it... let's say, it forces you to play "goofy foot"). |
| Navigation |
| Message Index |