Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Depth of TV area?  (Read 2463 times)

0 Members and 1 Guest are viewing this topic.

britinva

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
Depth of TV area?
« on: January 31, 2011, 03:46:20 pm »
Re: Project Arcade II plans.

Can anyone out there confirm the min depth between the back edge of O and the rear panel M?

Bassically trying to work out if a TV thats 20" deep will fit without modificatins to the standard design.

Thanks,
Mark

Rando

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 462
Re: Depth of TV area?
« Reply #1 on: January 31, 2011, 04:17:04 pm »
Re: Project Arcade II plans.

Can anyone out there confirm the min depth between the back edge of O and the rear panel M?

Bassically trying to work out if a TV thats 20" deep will fit without modificatins to the standard design.

Thanks,
Mark
For the Ultimate Arcade II plans, I called the company a couple of weeks ago with this same question.  Per the rep (I haven't built mine yet so cannot verify 100%) the dimensions INSIDE are as follows:
Width - 27"
Height - 24.5"
Deep - 20.5"

So based on that the 20" is there, but I imagine it will be tight.  Luck.
Rando - My build thread: http://forum.arcadecontrols.com/index.php?topic=107741.msg1142843#msg1142843 (work slowed but still progressing!

britinva

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
Re: Depth of TV area?
« Reply #2 on: January 31, 2011, 04:43:23 pm »
Thanks - I think there are potentially some way's the sneak a bit extra room...... like a thinner hardboard back panel, and thinner O & P.

I guess only way to find out is to start building - but few weeks before I start mine.

AtomSmasher

  • I'm happy to fly below Saint's radar
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3884
  • I'd rather be rich than stupid.
    • Atomic-Train
Re: Depth of TV area?
« Reply #3 on: January 31, 2011, 05:34:58 pm »
Does the new Project Arcade book follow the Ultimate Arcade II plans?  Because the original book didn't.

britinva

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
Re: Depth of TV area?
« Reply #4 on: January 31, 2011, 07:50:36 pm »
Does the new Project Arcade book follow the Ultimate Arcade II plans?  Because the original book didn't.

Yes, it does seem to follow the Ultimate Arcade II plans.

saint

  • turned to the Dark Side
  • Supreme Chancellor
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 5900
  • I only work in cyberspace...
    • Build Your Own Arcade Controls
Re: Depth of TV area?
« Reply #5 on: January 31, 2011, 08:25:10 pm »
The new book uses the Ultimate Arcade II plans, which affects chapters 2 and 6. However, if you prefer the original LuSiD plans, the companion CD has the original chapters 2 and 6 with those plans. :)
--- John St.Clair
     Build Your Own Arcade Controls FAQ
     http://www.arcadecontrols.com/
     Project Arcade 2!
     http://www.projectarcade.com/
     saint@arcadecontrols.com

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31