| Main > Main Forum |
| Advice on how hard this would be to convert to MAME |
| << < (3/3) |
| newmanfamilyvlogs:
Specifically: --- Quote ---The J-PAC does not contain any active sound circuitry owing to the JAMMA standard not providing good sound capabilities (one speaker only), nor any powerful enough voltage supply being readily available. The JAMMA standard is mono sound. The JAMMA edge connector speaker wires are routed to screw connectors on the J-PAC. These connections can be used to connect a powered PC sound card to the cabinet speaker. Alternatively for better quality stereo sound, simply use a normal pair of PC speakers, either powered or passive, and place inside the cabinet or wire to the cabinet speaker(s). --- End quote --- Soft15kHz works as a replacement for the ArcadeVGA, with the exception of not working outside of windows (eg: bios start up screens). The JPAC will compensate for this however by 'halving' the incoming signal in order to present a safe signal to the monitor. |
| markronz:
Thanks for the help guys! I really appreciate the info! |
| Navigation |
| Message Index |
| Previous page |