Main > Main Forum

my new problem...

Pages: (1/1)

jolietcr14:

just swapped mk3 board for sf hyper fighting...cant seem to access my menu to put on free play...manual says there is a switch in the  coin door but after drillin out locks ..opened the door and see no switch....im sure its an easy explanation but this is my first board swap!!!...

Nephasth:

Just wire up a switch to the pins on the board for the switch that is supposed to be behind the coin door.

BobA:

You might already have a test switch somewhere in you cab. Check the jamma connector to see if one is already wired.


jolietcr14:

FIGURED IT OUT...YOU SET THE DIPSWITCHES...THANKS GUYS

Pages: (1/1)

Go to full version