Main > Software Forum
New ControllerRemap utility, 7/11/13 update available (Version 0.0.11)
sin360:
Hello, I'm currently trying to finish my cabinet and I'm running into issues with my ctrlr file in mame. I made it using controllerremapgui and P1,P2 the trackball and spinner work, but P3&4 are not. The joysticks are not working and the buttons are not configured correctly. I compiled my mame64 0.155 with hiscore and no nag. Here is a pastebin of my ctrlr file. http://pastebin.com/EYKLKuXY
I forgot to add that with no control file selected I have the same issue.
drventure:
It's hard to be sure what's going on. It looks like things are mapped right in your ctlr file.
If you have a look at the generated result file (or use the /test option) does the keymapping look right there?
You mention that things don't work even without the ctrlr file in the mix. If that's the case, you may not have you keyboard encoder mapped to the keys you thing it should be mapped to.
For instance, p4 joystick down is the N key in the ctrlr file, but if your keyboard encoder isn't set up like that (or if you've got the switch wire wired to the wrong input on the ctlr, then that'd be a problem.
Those a few things to check for anyway.
sin360:
Sorry I forgot to mention that I made a ctrlr config using the hotrose config as a starting point and added P3&4 and they worked, but I couldn't get the trackball and spinner to work in that file.
stigzler:
Have you checked any default mame or game .cfgs in mame/cfg folder? Any controls in cfg folders here can stop ctrlremap.cfgs working. More details here:
https://controllerremapgui.codeplex.com/wikipage?title=Setting%20up%20Per-Game%20Settings&referringTitle=Documentation
sin360:
Ok I made progress still not sure exactly why my ctrlr config is not working as it should, but the controls are working now. First yes I got rid of all my configs and started from scratch and still had the same issue. I was originally using mameuifx before I decided to compile my own copy of mame64 which got me know where. It was in the back of my head the whole time that mame was using some default, but the file was empty and I figured that my config should override it, but it didn't.
So long story short I loaded mame64 went to the general config and looked at players 3&4 and they were setup to defaults. So I changed just players 3&4 and now everything works as it should. I opened up he default config and it has the players 3&4 now. So I added my neogeo setup to the ctrlr file I was using and everything works well now.
Thank You all for the help
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version