Main > Main Forum
GAMEBOX Multi-Game Platform TV Video Game Console -MAME-
<< < (19/50) > >>
msolajic:

--- Quote from: RandyT on February 03, 2011, 12:46:30 am ---And the board is labeled SDA and SCK where the wires attach, instead of the  D+ and D- one would expect for USB.  May or may not be significant.

--- End quote ---
Judging to the names of the pins, it should be a NES/SNES-like protocol. You send pulses to SCK and read out SDA. Looks like a simple SPI protocol to me.
newmanfamilyvlogs:
I'm assuming that means it uses this proccessor?
ftp://ftp.ingenic.cn/2soc/4755/Jz4755_ds.pdf


--- Quote ---WLAN, Bluetooth and expansion
options are supported through high-speed SPI and MMC/SD/SDIO host controllers. The TS (Transport
stream) interface provides enough bandwidth to connect to an external mobile digital TV demodulator.
Other peripherals such as USB 2.0 device, UART and SPI as well as general system resources
provide enough computing and connectivity capability for many applications.
--- End quote ---
ibuildrockets:
Hi,
First time poster, short-term lerker. Bit of a gadget freak and build rockets for fun :)

Found the link to the forum on DX. Just had my Gamebox arrive tonight and posted the message on DX about the Select & Start buttons :)

Here's a screenshot:



Oh - has anyone been able to figure out how to access the Clock & Calendar (not that I want or need the feature, just curious?!!)

Reading through the PDF - Page 33 states:

BOOT_SEL1Other Condition
(PE25’s internal pull up is disabled)Boot From1PE25 is low or ADIN1 channel > 381NAND flash1PE25 is high and ADIN1 channel <= 381USB2.0 device @EXCLK=24MHz0PE25 is low or ADIN1 channel > 381SD card: MSC00PE25 is high and ADIN1 channel <= 381USB2.0 device @EXCLK=24MHz
And Page 7:
RISC instruction set to support Linux and WinCE

Hmm....

Cheers,
Sascha.

http://www.ibuildrockets.com/
micky4fun:
hi all

tools and driver chip here , i aint got a clue how to use them , but someone might
ftp://ftp.ingenic.cn/3sw/
as per dealextreme site , look for tools and driver chip thread

also just to ad anyone playing gba games off of sd card , press select and R1 at the same time to save and load game data

mick
bigster:
Mick, you still need a gba cart?  I have a super card cf with a 512mb cf card and reader...pm me
Navigation
Message Index
Next page
Previous page

Go to full version