| Main > Main Forum |
| Help w/ programming Bill Acceptors |
| << < (2/4) > >> |
| jimmy_d:
Gonzojoey, can you please be kind enough to send my the file for updating the firmware on the A6? I've been going nuts trying to figure this out. Cheers, Jimmy. |
| ed12:
are u in usa or canada ? as i have every canadian bin.. to use the fpoo1 to copy with is easy set to read read unit save .bin to program is just as easy set fp001 to program open fbr programming s/w in the center u might see it calling for an s file just sroll it down to show all file's load the .bin into the program now press and hold the reset button for about 10 sec's once realsed u will hear the dba reset it's self once it has fire ,the bin in >hit program key for s/w< wala u are up-dated ed |
| jimmy_d:
Wow. Hi Ed, you lost me at "are u in usa or Canada". haha. I am in Australia. I am not following when you say "set to read unit". I have normal option, or program option. I connected the cable to the programmer and a good (working) V6 BA, which is the unit I want to pull the bin file from. When I clicked on the download button an error came up saying "fatal error" and then FW16 shuts down. What switches should I have selected on the programmer? L1, L2, or L3? I'm assuming I need to have the other switch set to Normal? Thanks in advance for your help. Jimmy. |
| lilshawn:
this is a piece of software that you use to connect the computer to the programmer to load the software to the programmer. you can use this program to also read the BIN out of an acceptor as well. you have to have an acceptor connected either way to power the FP001. set your switches to PC -> programmer -> target and then hit the copy button. connect your out of date acceptor and do the same and set the other switch to program. click auto and it will load the new firmware directly to the acceptor. if you want to load it to the FP001 for use on several acceptors set the switch to PC -> programmer this is all explained in detail in the manual that came with the FP001. |
| ed12:
thk-u shawn.. the reason i asked where u are is simple,if in usa the u would need a usa .bin if canada then u would need a canadian .bin same with uk/aussie/tiwian/china country is most important,as 1 .bin dose not fit all.. where it will work ie usa .bin in canada,the dba will not take canadian money... now u will also want ba-test-tool this is used along with your white card to recal.the dba after u load the new .bin ed |
| Navigation |
| Message Index |
| Next page |
| Previous page |