Main > Main Forum
Help w/ programming Bill Acceptors
<< < (4/4)
lilshawn:
cool jims, once you have the BIN you will be almost ready to go.

with your programmer you should have received a white bill sized "Calibration card" you will need this  after you load the new BIN file into the outdated acceptor.

If you don't have one, or you've lost it, you'll have to contact a representative from ICT to obtain one....or find a vendor in your area that has one you can borrow Sometimes you can go without calibration, but the likelihood of it working properly is very very low.

the sensors often need to be calibrated when you change the binary in them to help pick up changes in the makeup of the new bills that were added. not calibrating can make the acception of old bills be lower, and the acception of the new bills be next to zero.
jimmy_d:
Yep, I have the card and everything to do the job, but I am stuck.
I have connected the BA to the fp001 and the fp001 to the pc.  I have opened the FW16 s/w, but the copy button is not highlighted for me to select.
Only "download", "search" and "Auto" are the only options highlighted for selection.
Am I missing something?

This whole process is driving me mental. 

Thanks,
Jimmy.
ed12:
u will need ba-test-tool
it is a total different program then fb
i will need your e-mail,as the size is to big for our up-load's
pm me it
i will fire it off to u

ed
jimmy_d:

--- Quote from: ed12 on August 30, 2014, 12:50:19 pm ---u will need ba-test-tool
it is a total different program then fb
i will need your e-mail,as the size is to big for our up-load's
pm me it
i will fire it off to u

ed

--- End quote ---
Done.  I await your email.  Cheers mate  :)
ed12:
e-mail sent
u will have q's
ask away in the channel

ed
Navigation
Message Index
Previous page

Go to full version