Arcade Collecting > Pinball

Help...VP window is appearing on Backglass when table is opened in Hyperpin

(1/1)

HanoiBoi:
I'm working on adding tables and rotating DMDs on my pinball build. So, I've been in my Tables directory, my Visual Pinball.xml file and a couple Table script files.  That's about it.  All of a sudden, when I open a table in Hyperpin, I'm seeing the Visual Pinball window on the backglass. 

Even after rebooting (with Hyperpin in Start Up) the visual pinball window is front and center once I select any table.

What might I have done, and how can I get this to minimize and not be seen?

shilmover:
Assuming you have multiple monitors for this setup... Do this:

1. Open up VP
2. Make the window as small as possible
3. Move the VP window to the Playfield monitor
4. Close the VP window

That should fix it.

HanoiBoi:
Thanks so much shilmover!   :applaud:

I do have multiple monitors.  While working on my tables, I moved the VP window to the backglass monitor versus the playfield monitor so that I could better see what I was doing.   I did not realize that the placement of the VP window would matter.

Thanks again!

 :cheers:

shilmover:
Glad it worked...

Navigation

[0] Message Index