Main > Main Forum
Keys not registering on JPAC - please help!
BobA:
Have you attached a pass thru keyboard and does it register?
BobA:
Have you tried the advanced testing?
ADVANCED TESTING (optional)
If in DOS, enter COPY CON to suppress the command prompt. On a keyboard plugged into the pass-through, press CTRL-ALT-P. (press and hold each key in this order). Enter "T" in the menu to enter test mode. All pressed buttons and joysticks will be displayed on the screen. The input will be shown, followed by the code which is currently assigned, followed by the shifted code, if one is assigned. Test all buttons and joystick switches. If all OK reboot to exit. Now ready to play!
slapaham:
Cheers Bob... I'll give it a go now and post up what happens. Fingers crossed! :cheers:
slapaham:
Mmm, well, I've managed to dig out an old PS/2 keyboard to try as a pass through and it doesn't work... ???
I'm convinced it's the P2 B3 that's causing the problem as the LED lights when I press it and I still get around 30 flashes still... but when I look at the button, I can't see any problems with it... :angry:
BobA:
Disconnect one of the wires from the button just in case it is shorted in the switch.