Main > Project Announcements
UK First Mame Cabinet Attempt - Planning.
Blyths:
Hi all,
I have been into arcade games all my life and can still remember when space invaders and asteroids were the best games around ;) My first console was an ATARI with walnut dash, then commodore 64, then Amiga, then PC.
I found MAME by accident years ago, then found out about these strange people :P building there own arcade machines and have always wanted 1 of my own. The closest I have got so far was buying a X-Arcade duel controller, then later the Tankstick, which to be honest I have had no issues with.
After years of looking I have decided that next year I will start my build and even if it takes 12 months I will have my own arcade machine :angry:
I liked the basic design used at arcadecab.com which i had planned to use with my X arcade and have had the plans sat in a draw for a couple of years but since the measurements are all in inches I have decided to use my own and use MM (millimetres).
I recently bought a VGA 29" monitor from Franco :cheers: so had a guide what my measurements need to be and have drawn a template on graph paper. I then wasnt sure how it would look so using a scale of 100:1 I copied my plans onto cardboard and made i model to see how it should look!
So hopefully after christmas a can buy some MDF and have a start!
Rando:
Hi Blyths!
I'm in the planning stages, much like you, so I can't offer much in the way of insight other than to say:
Make the first ever cardboard cab! That is so awesome, insert some hidden steel supports and have a paper based cabinet!
Ugly? Sure. But awesome? Oh yeah! :afro:
Termin8tor:
Good Luck, you say you "had planned" to use the X-Arcade. I hope you've now decided to build your own CP. It will look so much better.
jipp:
hey, welcome to the forum. I too am in the process of building a cab. started 5 months ago.. anyhow im in the home stretch.. getting closer every time i think about it.. i too like you research plans... and i first came across some plans that were printed on graft paper like you, 1" per square.. anyhow.. before i cut a piece of wood i built a card board model of that cab. i think they refer to them as lucas plans? i forget now, at any rate. i ended up going with plans from mameroom.com cause my door ways are narrow and needed to get it in and out. so the ultimate 2 plans are in two pieces so i can get it in and out of door ways. if it was not for me building the cardboard model first i probably would of built something i could not get in and out of my room.. you are on the right track with the model.. and look forward to your build. rock on man. :)
chris.
Blyths:
Yeh I plan to build my own controls, ;D thinking instead of a spinner I will use a trackball for tempest etc, and put a rotary joystick in the place for the spinner as i like ikari warriors etc