Main > Main Forum
Monitor ?
ICPjuggla:
--- Quote from: cotmm68030 on December 17, 2010, 03:49:29 pm ---You'll need to know what model you have so you know if you'll need an isolation transformer or not.
Either way, creating the plug will be as simple as cutting the end off a decent weight cable and twisting the wires together. Soldering them is optional. Then wrapping them back up with electrical tape.
Regardless, the first step is identifying your monitor.
--- End quote ---
Wells Gardner model no. 25K7191, 120V 60Hz 100W Max. It's an old simpsons 4 player cab whitch was converted into a Gi Joe cab.
newmanfamilyvlogs:
Just googling for that model numbers brings you to a helpful page with lots of relevant information:
http://www.jstookey.com/arcade/WG_25k7191/
ICPjuggla:
--- Quote from: cotmm68030 on December 17, 2010, 04:36:44 pm ---Just googling for that model numbers brings you to a helpful page with lots of relevant information:
http://www.jstookey.com/arcade/WG_25k7191/
--- End quote ---
Awesome, thank you very much!!!!
Gray_Area:
I think this information is in the wiki.