Main > Project Announcements
Rando's UAII cab progress - Playable!
Rando:
Just an update,
After completing about 95% of my floor project, we got massive rain in NJ. Sometime during the storm my sump pump tripped the circuit that it was on and stopped. That night my wife went downstairs to get something and screamed up that the floor was making "squishy" noises as she walked on it.
:badmood: :badmood: :badmood:
I flipped the breaker and the pump cranked back up, but the overflow put 1-2 inches throughout the entire basement. For the next 12 hours I removed almost all of the laminate flooring and subfloor panels, so I could get to the water left on the floor and suck it up with my most recent purchase: Wet/Dry vac.
The bad news:
- The laminate flooring has a fiber base, so whereever it got wet it expanded, so I had to trash about 40% of the flooring
- I also trashed about 75% of the subflooring panels, basically wherever the water rose above the rubber bottom and saturated the actual wood panel. I probably could have saved more but I damaged a lot during removal and didn't want to risk moldy panels
- The sheetrock in most places was all the way to the floor and some sections held so much water they crumbled when I yanked on them (This was obviously not the first time this happened)
The good news:
- Because of the subfloor, everything was raised off the cement floor, so nothing in the basement actually got wet or was damaged. So cabinet, extra PC cases, cardboard boxes with homework I did when I was 5, all okay.
- Flooring and subflooring were both on sale at 10%, and we were able to get another 10% off, so replacement flooring was cheaper the second time around
- Insurance gave us a check to cover materials without issue. Doesn't cover the time I spent, but so be it
After moping around for a day or so, I got to work:
- Cleaned up, cut out damaged sheetrock, got dumpster for ruined flooring and other crap
- Replaced Sump pump with stronger newer model
- Changed outlet powering pump to avoid shutoff in future
- Sheetrock has been replaced, spackling now, should be able to repaint today/tomorrow
- Ordered backup pump, battery, and moisture alarm - To prevent repeat disaster in future
:soapbox: (I recommend this to all with basements!!!)
Entire basement has french drains around border, which were working as intended, but water wasn't flowing out, so it just overflowed. :banghead:
Obviously all work on Cabinet has been halted. I plan to take a day or two off, hope to have flooring completed AGAIN by the end of next week. I had the project timed so well to have basement and cabinet completed by the time it got nice outside so I could move to yardwork.
Side note, this was the same weekend as the Japan disaster, so whoever I complained to came back with "At least you're not in Japan!" Yes, I know that tragedy is FAR superior to my own, but in my little world MY personal tragedy sucks too!!! :cry:
TopJimmyCooks:
Stay strong bro. Sounds like you dove right in on the fix and it'll be a distant memory soon.
patm95:
Interested in this as I plan on getting a UA II cab sometime soon.
Rando:
Thanks all,
Walls are spackled and repainted, Subfloor is done, as is 2/3 of the flooring and about half of the baseboard molding. Should be completed to where I was before by the end of the weekend.
:angry:
--- Quote from: patm95 on April 12, 2011, 09:03:59 pm ---Interested in this as I plan on getting a UA II cab sometime soon.
--- End quote ---
So far my feedback is positive, though I haven't loaded any components into it. I have my questions about the pull-out drawer tray but we'll see how that goes. Overall it feels very solid though and is heavy as hell. Would definitely take components out and separate into its two pieces prior to moving if needed. Don't plan on moving it too much once it's in place however.
Endaar:
Sorry to hear about the basement...
--- Quote ---But with the T-molding installed, once the initial frame is together it can be REALLY tough to squeeze the next piece in for placement as it gets stuck on the molding.
--- End quote ---
You HAVE to trim the T-Moulding flush with the inside edge of the various panels, especially if you ever want to remove the rear access panel or if you will be adding glass in front of the monitor. I really did not want to do so, but it's not difficult with a sharp razor blade, and it came out clean.
--- Quote ---I have my questions about the pull-out drawer tray but we'll see how that goes.
--- End quote ---
The tray is the weakest part of the entire design IMO. I've been wanting to hinge the front panel so that it swings down, but haven't been able to find the right type of hinge. I'm (really) hesitant to screw into the diagonal edge of the panel right below the tray, so some sort of scissor hinge would be necessary.
Endaar
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version