Main > Main Forum

WHERE 2 Buy and how 2 cut plexiglass

Pages: << < (2/4) > >>

Blanka:

Try to find a water-cutting company, and let them do all. For roughly double the price of the rough plexi, you get the thing you want cut to the tenth mm perfect.

charlieram:

I found a good way was to firmly sandwich the plexi between 2 sheets of mdf, then you should be able to use a jigsaw and hole saws to cut through all three layers but make sure they are firmly together and don't cut too quick or the plexi will start to melt and bond with the MDF!

BonzNumber1:

if you have a Rona where you live you can get them to make your cuts in there cut shop or if you use acrylic you can cut it with a dremel but to do so you need a very steady hand to get your straight lines straight and you circle cuts circle otherwise it will look like crap

juanchocnva:

thanks everyone 4  the answers i think it will b harder 2 do with proper tools so the only option i have is rental.. :lol .am not sure if home depot can renme a router  but ill ask

thanks again... :cheers:

 :) :) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;) ;)



                                                              :afro:

Blanka:


--- Quote from: juanchocnva on November 21, 2010, 02:11:23 am --- so the only option i have is rental.. :lol .am not sure if home depot can renme a router
--- End quote ---
Once again: let someone else do all with a computer controlled machine.

Pages: << < (2/4) > >>

Go to full version