Main > Main Forum
RESOLVED U360 no buttons working
<< < (2/2)
Diewrecked:
The black cable goes from the harness to the COM on the top right switch, which is button 1 (hence the brown cable) - I cut it with a view to putting
it on the red button before I remembered I wanted to run buttons 1-3 on the top row rather than the bottom!

Do you think there's trauma on the COM cable connection on the harness then? I'll take another photo just of that when I get home so we can see but it would certainly account for everything (ie not even button 1 working).

Any other thoughts please guys?

I can daisy chain to the COM cable on the other harness can't I? Just thinking, otherwise I'll have to recable all those switches again (not to mention buying another harness). Cheers
Diewrecked:
Piecesof8/BobA - Guys bang on!! I went to take a photo of where the COM cable was going and it was indeed snapped off the COM terminal of button 1. Where you said "looks like the black wire from the U360 harness is chopped off" I thought you meant harness end not terminal end! I have now re-stripped and re-crimped the terminal on button 1 and all 8 buttons are responding.

Cheers guys!!!
piecesof8:
 :cheers:

I've found that doubling up the wire from the harness when I crimp it into the quick disconnects (stripping about double what you need and then folding it over before you slip it into the qd) helps it get a better connection - it's a pretty thin gauge of wire and seems to like to slip out. Glad you got it working!
Navigation
Message Index
Previous page

Go to full version