Main > Project Announcements
Galaga Bartop (99.9 percent done with pics) Update 11/16/2010
The Evil Collector:
Combo combo combo ;D
BobA:
Back to actual construction. Gathering up the parts to put into the cab and finishing various pieces.
First pic: LCD screen that is going to be used. Stripped down to screen and bezel.
Second pic: Control panel with button and joystick holes drilled. Coin button and speaker to be mounted on the front of the cab under the CP. Light for marquee.
Third pic: Test rig and other buttons connected to jamma harness to test the function of the circuit board. Unused wires cut back as they take up alot of space and probably will never be required.
Fourth pic: Exhaust fan mounted in panel at the top of the back.
Not shown ATX power supply to power the whole bartop. Power on jumpered to GND so the supply can be turned on and off with the PS switch. Marquee light, coin light, LCD monitor, fan and circuit board all connect to 4 pin drive connectors.
leapinlew:
--- Quote from: The Evil Collector on November 09, 2010, 04:54:01 pm ---Combo combo combo ;D
--- End quote ---
C-C-C-C-COMBO BREAKERRRR
BobA:
Speaker and fan mounted. Going to have to clean cab and touch up some spots when complete. Thought I would get the hardware in then design the graphics around it.
That is it for tonight. :cheers:
BobA:
Installed buttons and joystick on control panel.