Main > Main Forum
Happ buttons are too long!
<< < (2/3) > >>
justinjstark:

--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The colors are a bit weird.  I would like white or black ones.   :dunno

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---
BurgerKingDiamond:
Like LeapinLew said, any momentary push button will work. I used this button from Radio Shack as a coin button on my Jamma cab.

http://www.radioshack.com/product/index.jsp?productId=2062510

It's tiny, and the red button/black bezel happened to match my cp buttons.  I actually think it's better to use something other than regular buttons for admin functions.
justinjstark:
Lizard Lick has these Seimitsu pushbuttons which come in better colors.
Q*Bert_OP:

--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---

I've bought those before...they are Sanwa.
LeedsFan:

--- Quote from: Q*Bert_24/7 on October 29, 2010, 10:32:07 pm ---
--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---

I've bought those before...they are Sanwa.

--- End quote ---

Well in that case they won't just be fine for "admin buttons"... they are vastly superior to Happ's own buttons for gameplay.
Navigation
Message Index
Next page
Previous page

Go to full version