Main > Main Forum
Do I Need Anything Else To Mount My Joysticks?
Pages: (1/1)
LiquidFlame:
This should hopfully be a quick question. I'm planing on getting 2 Happ Competition joysticks, and I plan on getting my CP from here: http://www.arcadedepot.com/HTML/control_panels.html Besides getting carriage bolts, do I need anything else special for mounting the joysticks. I've seen mounting plates for joysticks but it seems like people only use those for wood CP.
Smeghead:
I think so long as you get the little plastic circles around the base of the stick your good to go
goldenageofarcade:
I've built 2 cabs using those panels, I didn't use carriage bolts for the sticks (Happs on 1 cab, the other had Ultimarcs), I used pretty thin (1/8" or so) machine screws with little bolts and lock-washers on the botton, they've never budged. I did paint the screw heads black so they aren't as shiny. Carriage bolts are usually pretty thick, no? With squared-off tops? Those wouldn't work well for this unless you filed the holes in the panel to be square (unless I'm thinking of something else...) In any case, a trip to any hardware store will yield plenty of obvious options, it's pretty much a slam-dunk with those panels.
LiquidFlame:
Thanks for the info, i'll be posting my arcade project in the project announcements soon.
DeLuSioNal29:
Happ Comps are meant for wood, not metal. I'd probably install a piece of wood to sandwich in between the metal cp and the joystick before bolting them in. Pretty simple to do. I'd make them 1/2 inch. Or else they will be too tall.
Or you just go with the Sanwa JLW joysticks (meant for metal panels).
Good luck!
D
Pages: (1/1)