It is only a single player cab but can be used as 2 players when a usb joystick is plugged in.
Control panel drilled for joystick 6 action buttons and 1/2 player and 1/2 coin. A forstner bit was used in a drill press.
Joystick is an Ultimarc Magstick Plus with ball top
Minipac used with terminal strips to make connecting the wires easier. I had the minipac from a deal Andy
offered along time ago but I did not have a harness. I think the terminal strips let you do a neater job of the
wiring as there is no surplus wire to bundle up. Get an ipac and save yourself the work of wiring the term strip.
2 non amplified speakers to be used in the cabinet. Leftovers from a 5.1 pc speaker set that I used the
L and R speakers and Woofer and amp. (Sill have a center speaker left)
2 buttons mounted on the sides of the cab for pinball flippers. Clearance at this point is tight so careful drilling required. I used the Kreg Jig to mount the front panel as you can see that using the supplied blocking would have made the area too small for the buttons.
View of button on one side of the cab.