Main > Main Forum

Mounting 2 Happ Joysticks.

Pages: (1/2) > >>

Beeman:

Hey folks,
I bought 2 competition happ joysticks from GGG and am looking @ mounting them to my control panel. i have a thin sheet metal panel with plexi on top. The Metal is quite thin, 1/8th inch or less.
What type of mounting hardware (bolts/nuts/washers) should i be looking for at the hardware store? Also.. is it possible to mount flush with the metal so its not sticking out of the top?

Thanks for the help guys.

WhereEaglesDare:

why not mount then under the metal with the stick sticking up?  use carriage bolts and nuts from lowes

Beeman:

Won't that still have something sticking up past the flat metal? I'm trying to find a way to mount them and keep everything flush with the metal.

lilshawn:

you could layout and weld some studs to the underside to hold the stick.... otherwise ur stuck with bolts

WhereEaglesDare:


--- Quote from: lilshawn on October 06, 2010, 07:30:23 pm ---you could layout and weld some studs to the underside to hold the stick.... otherwise ur stuck with bolts

--- End quote ---

not a bad idea. you could find a local machine shop and get that done, wont cost more then 30-50 bucks.

Pages: (1/2) > >>

Go to full version