| Main > Main Forum |
| Mounting 2 Happ Joysticks. |
| (1/2) > >> |
| Beeman:
Hey folks, I bought 2 competition happ joysticks from GGG and am looking @ mounting them to my control panel. i have a thin sheet metal panel with plexi on top. The Metal is quite thin, 1/8th inch or less. What type of mounting hardware (bolts/nuts/washers) should i be looking for at the hardware store? Also.. is it possible to mount flush with the metal so its not sticking out of the top? Thanks for the help guys. |
| WhereEaglesDare:
why not mount then under the metal with the stick sticking up? use carriage bolts and nuts from lowes |
| Beeman:
Won't that still have something sticking up past the flat metal? I'm trying to find a way to mount them and keep everything flush with the metal. |
| lilshawn:
you could layout and weld some studs to the underside to hold the stick.... otherwise ur stuck with bolts |
| WhereEaglesDare:
--- Quote from: lilshawn on October 06, 2010, 07:30:23 pm ---you could layout and weld some studs to the underside to hold the stick.... otherwise ur stuck with bolts --- End quote --- not a bad idea. you could find a local machine shop and get that done, wont cost more then 30-50 bucks. |
| Navigation |
| Message Index |
| Next page |