Main > Main Forum
Aimtrak 5 pin connector
<< < (2/3) > >>
TAG:

--- Quote from: AndyWarne on September 29, 2010, 11:47:08 am ---The connector was not planned to be fitted until we have complete guns on sale but I brought this forward and we now fit it on all the modules.

--- End quote ---

Speaking of which, any update on when the complete, pre-assembled guns will be available?  Thanks!
Donkbaca:
So... Andy can you let me know hiw to install wires into the 5 pin connector housing? what gauge wire do I use and how do I put the wiresin the housing and make them stay?
AndyWarne:
The wires crimp into crimp contacts which push into the housing. You can do this without the correct (expensive) crimp tool using a pair of sharp-nosed pliers.
Donkbaca:
Contacts like these?
http://www.frys.com/product/2050779

Thanks for your patience Andy
AndyWarne:
No the contacts have to be the type made for the housing. You can buy pre-crimped wires:

http://uk.farnell.com/multicomp/hca-a0118-004a-lf/lead-skt-free-end-150mm-pk10/dp/1656583?crosssellid=1656583&crosssell=true&in_merch=true&

Although this is a Farnell link, Newark are owned by Farnell so should have them also.
Navigation
Message Index
Next page
Previous page

Go to full version