Main > Retail vendors
Paradise Arcade Shop, LED Joysticks and more (Honolulu, HI)
Nephasth:
--- Quote from: armi0024 on October 06, 2014, 04:22:11 pm ---You will also see the Nephrings available with new LEDs!
--- End quote ---
:applaud:
I need some.
Darkfall:
I haven't been able to get a response to any queries, which is frustrating. I sent an email to info@paradisearcadeshop.com on January 21, then sent the same email via the website on January 28. It's January 30 - no response to either email. Both were asking a couple of simple questions before ordering - primarily about the website not displaying options for different weight microswitches and different LED options (12V vs 5V) for buttons. So in addition to not getting any responses, it's clear that the website is a mess, too.
That doesn't inspire any confidence that when I place an order, that it'll be shipped right away. Or at all, even!
I think I shall order elsewhere. I don't get any warm fuzzies here. Sorry, Bryan, but you can't run a business like that and expect people to just push through in an effort to give you an order. :banghead:
armi0024:
@darkfall not sure where the info@paradisearcadeshop.com email is going, but it's not one we use, so I apologize but the email is probably in our spam folder or the nether realm.
The lights come with 12 Volt lights currently as stated in the product description. We have temporarily removed the 5volt option from the product page as we are revamping how the lights are packaged. In regards to the microswitches, it does appear that the microswitch option was not turned on with the new site upgrade. I will make sure that's addressed tonight
I know Susan is 1-2 days behind on emails, she's working on the emails from the 28th, my fault as I turn 40 today and she's been trying to make this a memorable birthday. If you have any questions feel free to post here and I would be happy to answer.
armi0024:
Good questions for here:
1. Will those silencer rings work with the buttons I have selected?
The silencer rings are for the Sanwa and Seimitsu buttons, they will not work with the IL or Paradise LED buttons.
2. These buttons have 12V LEDs. I have done some research and it appears that they'll light up at 5V at around 5 mA (according to a post from you guys on Arcade Controls' forum back in 2011, thus I should be ok driving 8 LEDs off of a USB port's power, by the sound of it. There was mention of 5V LED options, but I didn't see such an option on the site anywhere, nor do I know if the 5V LEDs would pose a greater amperage draw than the 12V LEDs driven at 5V. Advice?
The 5 volt option is not currently available on the site because we are working on bundling these in better packaging, that will possibly be only for 12 V. The 5Volt leds are a super bright led, that draws around 30ma, so so 8 leds would be at 240ma, which may be fine if that's all your driving. if needed we can ammend your order, but these leds are about .75 more for each button.
3. Do these buttons come with the 20g switches? There was said to be an option, but I didn't see a drop down for one anywhere. I'd like to keep everything as quiet as possible, so I'm not making everyone in the house crazy while I bash away on the buttons in the living room *grin*. The plan is to order additional 20g switches for the joysticks (Ultimarc Mag-Stik Plus - I really want the 4/8 way switching from the top of the panel).
Yes, this option for some reason was turned off on the website after the upgrade, I will make sure it goes back on today, thank you for letting us know.
Darkfall:
Sorry, it was the sales@paradisearcadeshop.com I had used (just checked my sent folder to confirm).
While the response via email never happened, you definitely responded quickly here, which I can live with.
--- Quote from: armi0024 on January 30, 2015, 11:42:57 pm ---2. These buttons have 12V LEDs. I have done some research and it appears that they'll light up at 5V at around 5 mA (according to a post from you guys on Arcade Controls' forum back in 2011, thus I should be ok driving 8 LEDs off of a USB port's power, by the sound of it. There was mention of 5V LED options, but I didn't see such an option on the site anywhere, nor do I know if the 5V LEDs would pose a greater amperage draw than the 12V LEDs driven at 5V. Advice?
The 5 volt option is not currently available on the site because we are working on bundling these in better packaging, that will possibly be only for 12 V. The 5Volt leds are a super bright led, that draws around 30ma, so so 8 leds would be at 240ma, which may be fine if that's all your driving. if needed we can ammend your order, but these leds are about .75 more for each button.
So I may be better off with the 12V LEDs and power them at 5V and get the lower current draw, then. That works.
3. Do these buttons come with the 20g switches? There was said to be an option, but I didn't see a drop down for one anywhere. I'd like to keep everything as quiet as possible, so I'm not making everyone in the house crazy while I bash away on the buttons in the living room *grin*. The plan is to order additional 20g switches for the joysticks (Ultimarc Mag-Stik Plus - I really want the 4/8 way switching from the top of the panel).
Yes, this option for some reason was turned off on the website after the upgrade, I will make sure it goes back on today, thank you for letting us know.
Awesome. As soon as it's back, I can place an order.
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version